How to Choose an Infrared Patio Heater: Power, Area & Installation

How to Choose an Infrared Patio Heater: Power, Area & Installation
SPONSORED GUIDE · VEITO
BUYING GUIDE

How to Choose an Infrared Patio Heater: Power, Area & Installation

How to choose an infrared patio heater based on power, exposure, protected area, IP rating, mounting position and the real zone you want to heat.

Sponsored contentThis guide was created in collaboration with Veito. Technical information is based on manufacturer data.
Practical guide

The first question is not which model. It is where the heater will work.

A sheltered balcony, an open restaurant terrace and a covered veranda can have the same floor area but very different heating requirements.

Start by identifying the occupied zone, wind exposure, mounting distance and whether the heater must remain fixed or move with the seating layout.

POWER

2000W or 2500W? Match output to the real zone.

A 2000W model can be enough for compact and protected zones. A 2500W model gives more reserve for larger, colder or more exposed areas, but correct positioning remains essential.

2000W or 2500W? Match output to the real zone.
EXPOSURE

Wind and open sides change the result.

Two terraces with the same area can feel very different. An exposed terrace usually demands better positioning and more radiant coverage than a sheltered space.

Wind and open sides change the result.
PROTECTION

Check the IP rating separately from heater power.

Blade S and Nevada are listed as IP55, while CH2500RW is IP24. The IP rating helps determine whether a model suits a more exposed or more protected position.

Check the IP rating separately from heater power.
INSTALLATION

Stand or fixed mounting changes how the heat is used.

Freestanding heaters can move with the occupied area. Fixed mounting keeps the floor clear and is ideal when the target zone is known in advance.

Stand or fixed mounting changes how the heat is used.
POSITIONING

Distance and angle can matter as much as wattage.

Infrared heat is directional. Mounting too high, too far away or at the wrong angle can reduce perceived warmth even when nominal output is high.

Distance and angle can matter as much as wattage.
FAQ

Useful questions

01How much power do I need for a 15 m² terrace?
It depends on enclosure, wind, distance and positioning. A protected 15 m² terrace may need less output than an exposed one.
02Does IP rating matter outdoors?
Yes. It describes enclosure protection and should be considered together with actual exposure and installation instructions.
03Is a stand less efficient?
No. The stand changes positioning, not the heating principle.
04Can I rely only on quoted heating area?
No. Heating-area figures are indicative because real comfort depends on temperature, wind, exposure, height and distance.
Veito range

Choose the heater for the space you actually use.

Compare the Veito models after you define the occupied zone, exposure, installation type and available electrical capacity.

Explore Veito ↗

Leave a Comment